|
|
Erik: Yes have received it,sorry for not responding immediately , attended a conference up North.Sent from my iPhone Le Roux Breytenbach On 20 Feb 2020, at 02:17, Erik Snyman erik.snyman@bigpond.com <flyrotary@lancaironline.net> wrote:
Hello Le Roux
Just confirming you received my post to you, written in Afrikaans? Erik.
------ Original Message ------
From: "Le Roux Breytenbach breytenbachleroux@gmail.com" <flyrotary@lancaironline.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Monday, 17 Feb, 2020 At 5:16 PM
Subject: [FlyRotary] Re: Intake Plenum 13 B
Erik :The plugs up version suites me better as there is for me more advantages than disadvantages.
If the intake manifold stands upright, then the throttle body is just in the right place, for the intake duct of the cowling and to make use of the ram air effect and simplicity of placing the air filter.
The hot exhaust exit, is in the middle under the engine, and with no complex bends that must passes the engine mount spaceframe. The exhaust exits the cowling on the same way than any other aircraft engine like lycoming or continental.
The oil cooler sits under the psru as in the normal version , and the air passes through the oil cooler, helps with the removing of the radiant heat of the exhaust as it is in the middle right behind the oil cooler.
The radiator can be side mount co-pilot side as there is enough space due to the side sump.
The gravity feed of oil that flows back to the side sump is in any way the same as in a normal version.
I think that I don`t have to “invent the wheel” as it was been done before by a genius builder.
As Lynn E Hanover always says and I quote: I could be wrong!
Le Roux Breytenbach
Hello Le Roux
Beautiful work. I find it interesting that you chose to do the plugs-up version. Any particular reason?
Erik in Oz.
------ Original Message ------
From: "Le Roux Breytenbach breytenbachleroux@gmail.com" <flyrotary@lancaironline.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Sunday, 16 Feb, 2020 At 8:46 PM
Subject: [FlyRotary] Intake Plenum 13 B
Completed the intake manifold for my 13B "plugs up" mount.Adjustable for the best performance (18 - 24 inch) then can be locked by silicone 50 mm hoseNext step to place the 4 injectors on the 44 mm intake runners.
Sent from my iPhone Le Roux Breytenbach South Africa
|
|