From: "Stephen Izett stephen.izett@gmail.com" <flyrotary@lancaironline.net>
Received-SPF: pass
 receiver=logan.com; client-ip=209.85.214.174; envelope-from=stephen.izett@gmail.com
Content-Type: text/plain;
	charset=utf-8
Content-Transfer-Encoding: quoted-printable
Mime-Version: 1.0 (Mac OS X Mail 12.4 \(3445.104.11\))
Subject: Re: [FlyRotary] Renesis oil pressure
Date: Fri, 15 Nov 2019 08:10:17 +0800
References: <list-13178815@logan.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
In-Reply-To: <list-13178815@logan.com>
Message-Id: <8427B86B-5F89-4E0E-BC0E-5D90296DA0E1@gmail.com>

Hi Fin

I thought the stock Renesis bypassed at approx 80psi and the racers lift =
theirs to around 100psi.
So I would have thought 100psi was fine unless you=E2=80=99ve chan ged =
the regulator to a much higher pressure.

Steve Izett
Perth WA


> On 15 Nov 2019, at 7:45 am, Finn Lassen finn.lassen@verizon.net =
<flyrotary@lancaironline.net> wrote:
>=20
> I'm starting to look at engine monitor sensors for my RV-4.
>=20
> In his Renesis report, Tracy mentioned 100 psi oil pressures. Not =
clear if they dropped after the engine got some hours on it.
>=20
> What kind of oil pressures are you seeing?
>=20
> Should I go with a 150 psi or a 100 psi pressure sensor?
>=20
> Finn
>=20
>=20
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   =
http://mail.lancaironline.net:81/lists/flyrotary/List.html