Return-Path: <13brv3@bellsouth.net> Received: from imf25aec.mail.bellsouth.net ([205.152.59.73] verified) by logan.com (CommuniGate Pro SMTP 4.1.8) with ESMTP id 3075914 for flyrotary@lancaironline.net; Fri, 12 Mar 2004 11:56:50 -0500 Received: from rad ([68.221.180.72]) by imf25aec.mail.bellsouth.net (InterMail vM.5.01.06.08 201-253-122-130-108-20031117) with ESMTP id <20040312165646.KGFP17649.imf25aec.mail.bellsouth.net@rad> for ; Fri, 12 Mar 2004 11:56:46 -0500 From: "Russell Duffy" <13brv3@bellsouth.net> To: "'Rotary motors in aircraft'" Subject: RE: [FlyRotary] Measurements of IDA manifold Date: Fri, 12 Mar 2004 10:56:18 -0600 Message-ID: <017201c40852$f08672a0$6001a8c0@rad> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0173_01C40820.A5EC02A0" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.4510 Importance: Normal In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 This is a multi-part message in MIME format. ------=_NextPart_000_0173_01C40820.A5EC02A0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable I've marked on the photos the dimensions I am interested in. I = recognized that the throttle body side of the manifold is at an angle, so it you = would give me the measurement from the center rear mounting bolt hole from = both holes (as they will undoubtedly be different (or were before they were machined {:>)) for that one.=20 =20 Hi Ed. You caught me just before departure. I'll measure these as best = I can. Unfortunately, I can only give you a measurement to where I = machined the TB side of the intake, which is the same for both runners. The = original TB flange was angled, and I don't have any notes of the original height. = I actually machined mine down further than what is in the picture, when I realized that it wouldn't fit. =20 =20 Rusty=20 ------=_NextPart_000_0173_01C40820.A5EC02A0 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable Message
I've marked on the photos the = dimensions I am=20 interested in.  I recognized that the throttle body side of the = manifold is=20 at an angle, so it you would give me the measurement from the center = rear=20 mounting bolt hole from both holes (as they will undoubtedly be = different (or=20 were before they were machined {:>)) for that one. 
 
Hi=20 Ed.  You caught me just before departure.  I'll measure = these as=20 best I can.  Unfortunately, I can only give you a measurement to = where I=20 machined the TB side of the intake, which is the same for=20 both runners.  The original TB flange was angled, and=20 I don't have any notes of the original height.  I actually = machined=20 mine down further than what is in the picture, when I realized that it = wouldn't=20 fit. 
 
Rusty=20
------=_NextPart_000_0173_01C40820.A5EC02A0--