Re: [FlyRotary] Pin Hole Coolant
Leak
Today I discovered several pin-hole leaks
in my cooling system (one drop every several minutes). They are
coming from a weld on the water pump housing.
Please tell me someone knows a good way to seal such leaks. A
re-weld would probably require removing the entire engine
:<
I also made the first attempted start today. Turns out I have no
spark... Guess I won`t be the first to go down that road.
I connected the signal from the CAS in parallel with the engine
monitor. That connection will be the first to go.
Dave Leonard
Go to a radiator shop and get a hot
melt epoxy stick, its made by Johnson MFG in Princeton
Iowa.
This is great stuff and I keep one in
the tool kit in my plane, its also works great to seal up radiators in
those tight places where you just cant get a weld into without melting
a tube.
Ken
|