|
|
Also check out www.conversionconcepts.com for ideas. He makes engine mounts
for all RV series. Tracy Crook is using his mounts. If nothing else, you
might get some ideas. I purchased mine there, and quality is excellent.
Paul Conner
----- Original Message -----
From: "David Carter" <dcarter@datarecall.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Wednesday, March 03, 2004 12:37 AM
Subject: [FlyRotary] Re: Name of OEM for Vans Engine Mounts?
> Perry, I have such a mount on order. Todd Bartrim did this first - I
> followed his footsteps. Here is the fellow's contact info - he is good to
> work with:
>
> -Eng mount - Custom Components 253-272-5554 Bruce McIntire,Tacoma e-
> mail cuscom@foxinternet.net: Eng mount pucks: Conical, not Dynafocal
> for my RV-6.
>
> If you decide you want your engine cowl openings to be different from
> "Lycoming",
> then you may want to talk to the fellow who makes cowls for Van - don't
know
> if same guy makes the -10 cowl: M&W Fiberglass - Mike 503-538-0101
> mwinc0101@aol.com Cowl I'm getting has no scoop for carb air.
>
> David
>
> ----- Original Message -----
> From: "Perry Casson" <pcasson@sasktel.net>
> To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
> Sent: Tuesday, March 02, 2004 9:26 PM
> Subject: [FlyRotary] Name of OEM for Vans Engine Mounts?
>
>
> > Hi All,
> >
> > If my memory is not failing me I think I remember sometime in the last
> > year or two someone mentioned the name of the shop that builds the
> > Lycoming engine mounts for Vans and that they would sell you a partial
> > mount that would be a good start for building a custom mount. I'd
> > really appreciate it if someone could send be contact info for these
guys.
> >
> > Looking to hack up a RV10 mount.
> >
> > Perry Casson
> >
> >
> >
> >
> > >> Homepage: http://www.flyrotary.com/
> > >> Archive: http://lancaironline.net/lists/flyrotary/List.html
> >
>
>
>
> >> Homepage: http://www.flyrotary.com/
> >> Archive: http://lancaironline.net/lists/flyrotary/List.html
>
|
|