From: "Kelly Troyer" <flyrotary@lancaironline.net>
Received-SPF: pass
 receiver=logan.com; client-ip=209.85.218.41; envelope-from=keltro@gmail.com
MIME-Version: 1.0
Date: Sun, 21 Jun 2015 09:56:57 -0500
Message-ID: <CAKEmuZ8SvCn49nM0p=d40FEBdRf2GCgJ86G+ANWqr2D1ePs9MQ@mail.gmail.com>
Subject: PERIPHERAL PORT INFO (Mark Steitle)
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Content-Type: multipart/alternative; boundary=001a1134fa5c6a6ab70519085e7a

--001a1134fa5c6a6ab70519085e7a
Content-Type: text/plain; charset=UTF-8

Mark,

   Even though I am going to the Dark Side (IO-360) for expediency for the
time
being I still want to use a Rotary eventually.........I am seriously
thinking about
P porting my 13B and would like to know how your 20B is holding up
particularly
at your port insert junction using the machined plates and
sealant.........Have you
had any major problems with leaks so far ?.........I have a pair of plates
from Paul
that have the "O" rings and if I recall correctly your plates were prior to
the ones
with "O" rings..........I am curious whether you had any major problems
when you
were smoothing and putting the radius the "TIG" welds........On the same
question
did the "TIG" welding seem to cause any warping of the rotor hsg steel
liner ?........

 Thanks,
 Kelly Troyer

--001a1134fa5c6a6ab70519085e7a
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr">Mark,<div><br><div>=C2=A0 =C2=A0Even though I am going to =
the Dark Side (IO-360) for expediency for the time</div><div>being I still =
want to use a Rotary eventually.........I am seriously thinking about=C2=A0=
</div><div>P porting my 13B and would like to know how your 20B is holding =
up particularly=C2=A0</div><div>at your port insert junction using the mach=
ined plates and sealant.........Have you=C2=A0</div><div>had any major prob=
lems with leaks so far ?.........I have a pair of plates from Paul</div><di=
v>that have the &quot;O&quot; rings and if I recall correctly your plates w=
ere prior to the ones=C2=A0</div><div>with &quot;O&quot; rings..........I a=
m curious whether you had any major problems when you</div><div>were smooth=
ing and putting the radius the &quot;TIG&quot; welds........On the same que=
stion</div><div>did the &quot;TIG&quot; welding seem to cause any warping o=
f the rotor hsg steel liner ?........</div><div>=C2=A0=C2=A0</div><div><div=
>=C2=A0Thanks,</div><div>=C2=A0Kelly Troyer</div><br>
</div></div></div>

--001a1134fa5c6a6ab70519085e7a--