flyrotary@lancaironline.net Mailing List Archive

from b&c (Bob Nuckolls from the Aeroelectric list): http://www.bandc.biz/d-submachinedpincrimptool.aspx from Stein Air (great supplier for avionics, etc; active in RV community): http://www.steinair.com/storedetail.cfm?productid=291 Either will accept a different tooling insert ($10) that will allow crimping the sub miniature pins used on some of the Garmin 430, etc connectors. If you have the skillset, it's a lot cheaper to just use the solder cup style connectors, but it is a *lot* more time consuming. Charlie (currently burning holes in my jeans....) On 6/2/2014 12:48 PM, William Schertz wrote: I purchased a crimp tool for D-sub pins from B&C for a lot less than 300$ (more like $40) Check B&C out Sent from my iPad On Jun 2, 2014, at 11:59 AM, "Joseph Berki" <flyrotary@lancaironline.net> wrote: What is everyone using for a 25 pin D connector? Are you using a crimp version or solder version? The crimp tool for D connectors can be as much as $300.00. Anyone have a less expensive solution? Thanks in advance for any input. Joe Berki Limo EZ -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html