flyrotary@lancaironline.net Mailing List Archive

Welcome back --- is that a Renesis Block? - You should give RWS a call asap.

2 guys, 1 crowbar and a 4-foot piece of pipe over a breaker bar will get the nuts off – still a struggle though.

Jeff

From:	Mark Steitle <msteitle@gmail.com>
Subject:	Re: [FlyRotary] Back in the game
Date:	Sat, 20 Jul 2013 18:37:02 -0500
To:	Rotary motors in aircraft <flyrotary@lancaironline.net>

What are you building? One suggestion, take it to a truck tire store and get them break loose the big nut on the flywheel end of the engine using their big impact wrench. You might as well do the one on the water pump end too. Otherwise, you'll be in for a really big fight to get it off by yourself.

Mark S.

On Sat, Jul 20, 2013 at 6:14 PM, Mark McClure <markmcclure@me.com> wrote:

Well after a year break - I have gotten back into the building process.

Cleaning out the hangar and getting everything set up to keep building. Managed to get my hands on this gal for $315 shipped to my door. Needs to be torn down and rebuilt, but if nothing else it will be a good learning process and be a basis for parts to build a new one.

Mark

This message, and the documents attached hereto, is intended only for the addressee and may contain privileged or confidential information. Any unauthorized disclosure is strictly prohibited. If you have received this message in error, please notify us immediately so that we may correct our internal records. Please then delete the original message. Thank you.

image001.gif

image002.gif