|
Message
I found that taking RTV and thinning it a bit with
MEK I can "paint" it on the fiberglass of the cowl and then lay thick aluminum
foil over it. It sticks very well and the aluminum is more than
enough to handle any radiant heat. Now if your header is only an inch from
your fiberglass then stainless foil would probably be a better bet.
Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message -----
Sent: Monday, February 23, 2004 9:46
AM
Subject: [FlyRotary] Re: exhaust
I use Stainless Steel Shim Stock from MSC. They come in a tube 6" wide by
50" in all kinds
if thicknesses.
McMaster
Carr also sells stainless "foil". I just bought some 321 ss foil
that's .002", and plan to use that to cover some parts of the
cowl.
Rusty
|