|
Message
Hi guys,
I'm at the point where I'm trying to
start my (3rd gen turbo LS1 coils) engine for the first time.
I turned the engine for about a minute. It
made no attempt to fire at all, so I removed a plug, grounded the side against
the block and looked for a spark while cranking. Nothing. I checked the hot pin
on the LS1 coil, and it had 12v. The other 3 pins seemed to be grounded. Other
than rechecking ALL the EC2 connections I'm not sure where to go from here. Is
it possible that my crank angle sensors aren't putting out the correct
pulse? How can I test this? Can I test whether the coils are getting a firing
pulse? If so, How?
Any suggestions
welcome.
John
Slade
|