That's great news David, the rotary fleet is growing fast!

   Send me your address and I'll get you on the 'button list'.

Tracy

Sent from my iPad

On Jun 14, 2012, at 10:43 PM, hoursaway1@comcast.net wrote:

Short flight, seasoned fighter/experimental RV8 builder test pilot, twice around the patch, 5950 RPM, coolant went to 220F on climb out, oil was at 210F, 78F OAT, temps climbed a little higher, powered back & setup for landing.  This is an RV6A Rotary, five years in the making, 13B Bruce T. aircraft modified eng., 2.17 RWS drive, EC2, EM2, Ivoprop Magnum 65-105 deg. elect. in-flight adjust., Hushpower res./muffler, intake similar to Tracy's RV4 before the Ren. eng.,  my own Dynamic chamber, 3" throttle body.  I do currently have a 180F therm. installed, might try removing to look for lower temp. #s, Then louvers in bottom of lower cowl, need more flight tests, cowl & coolers & inlets are very similar to Ed Anderson's RV6A Rotary, thanks Ed, Bill E., Tracy C.,  Dave L.,  & all the folks on THE LIST.  David R. Cook  RV6A Rotary aircraft.  Lansing MI