That looks really good, Doug!
Don’t forget to stick in a couple of thermocouples for EGT. You may
also need a bung for an O2 sensor if you are going to try and measure the F/A
ratio.
Bill B
From: Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net] On
Behalf Of DLOMHEIM@aol.com
Sent: Sunday, June 03, 2012 8:23
AM
To: Rotary
motors in aircraft
Subject: [FlyRotary] Exhaust
Progress
After five years of attempting to get two
different welders to come out my hanger to held on my exhaust system I finally
got a buddy to come out and TIG my thick wall stainless steel hand rail pipe
up. I think it came out very well but I also believe I should add
some external support to it in order to help carry the weight of the pipes
hanging out there on the manifold. I next will order in two 90 degree
pieces to sweep it down through the engine mount supports and then turn it aft
and run it to a muffler of some type...