Steven W. Boese wrote:
> Brian,
>
> I just made measurements on some Mazda OEM fuel injectors.  A high
> impedence injector draws 0.9 amps continuously at 12 V.  A low impedence
> injector without a series resistor draws 5 amps continuously at 12 V.
>
> My 13B requires less than 20 amps continuous current in normal cruise
> configuration with the strobes on and one fuel pump in operation.
>

Steve, what other loads are you running.  I'm using the stock injectors, which are high impedance.  My generator is
rated for 36A.  Keeping the total normal draw below 29A max load was my target.