I would have to look for sure, but if I recall, they are a Gates product. I used them on my installation. Got them from McMaster-Carr. Know the actual measured diameter before ordering, they do not go by trade pipe sizes, they use actual measurement.

Best,

Ben

--- On Wed, 3/30/11, Kelly Troyer <keltro@att.net> wrote:

From: Kelly Troyer <keltro@att.net>
Subject: [FlyRotary] Heat Shrink Hose Clamps
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Date: Wednesday, March 30, 2011, 9:16 AM

Tracy,

    Refresh me on the manufacturer of the heat shrink hose clamps you have mentioned

using in past posts.........Would you still recommend them and are you still using them ?

   Are you using them as backup on "Pushlock" hose and fittings ?...........

 

 (Wish my caretaker duties would Let me go to Sun-N-Fun to see you and all

of the Rotary group there)

 

Best Regards,

 

Kelly Troyer
"DYKE DELTA JD2" (Eventually)

"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold

"TURBONETICS"_TO4E50 Turbo