----- Original Message -----
From: "John Slade" <sladerj@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Wednesday, January 21, 2004 6:34 PM
Subject: [FlyRotary] Re: A/C mount pad, was: where does this hole go...


> > I believe John meant 0.1" 4130 steel.
> Right. They call it "100" (thousandths). I'll get the hang of all these
> different these units one day.
>
> > Nice bend John.
> With a hammer and a vice it would have been a PITA. This took about 15
> seconds (not including the 1/2 hour drive there and back). Cost was $10.
:)
>
> Just proves the old saying....the right tool for the right job.   It does
look professional, John.   Paul Conner
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>