|
|
On 1/18/04 10:20 PM, "John Slade" <sladerj@bellsouth.net> wrote:
>> Hi Guys, I have been all weekend at the airport trying to figure out the
>> plumbing on the Cosmo. The problem is hooking the aluminum tank as part of
>> the whole system and being able to send all the air to the tank.
>
> Hi Bulent. That expansion tank looks awfully familiar. :)
> I welded a dash 8 fitting into the rad tank and ran a hose up to the lower
> fitting on the expansion tank. I'm still trying to figure out where to plumb
> the side fitting to. I'm thinking of putting a T on the heater hose outlet.
>
> I'm telling you this not because I know its right, but rather in the hope
> that someone will tell me whether it's right or not. :)
>
> Regards,
> John
>
You can run a hose from the fitting on top of the engine closest to the prop
to the side of the tank.
Buly
|
|