|
Here's Laminova's response to my question regarding oil
flow rate and pressure drop. It appears the larger units have a low pressure
drop. The smaller units may not.
Bobby
Hi,
Below is a diagram with pressure drop at
different flow rates for our ECD54 cores. As you can see, the -329
will drop aprox. 0.18bar at a flow of 60 l/min (2.6PSI @ 15.8GPM). Note that
this pressure drop is over the core only. Hope this helps.
Best regards,
_________________________________
Lars Åke Andersson
Product
Manager
SEM AB
Phone: +46 532 61100
Direct: +46 532 61123
Fax: +46 532 12863
E-mail: larsake.andersson@sem.se
URL: www.opcon.se
Från: Bobby J.
Hughes [mailto:bhughes@qnsi.net]
Skickat: den 20 december 2010
04:02
Till: Fjellman,
Jerker
Ämne: Oil Flow Rate for
ECD54-329 (double core)
Can you please provide the oil flow
rates for the ECD54-329 (double core). The application is for a
high output RX8 engine. I need to verify the flow rate and pressure drop for the
oil.
______________________________________________________________________
This
email has been scanned by the MessageLabs Email Security System.
For more
information please visit http://www.messagelabs.com/email
______________________________________________________________________
______________________________________________________________________
This
email has been scanned by the MessageLabs Email Security System.
For more
information please visit http://www.messagelabs.com/email
______________________________________________________________________
Outlook.jpg
|