Mailing List flyrotary@lancaironline.net Message #5172
From: Haywire <haywire@telus.net>
Subject: RE: [FlyRotary] Fuel Coolers
Date: Wed, 7 Jan 2004 19:15:38 -0800
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Todd,
> I have been out of town and I am just now catching up on my
> reading - Lincolns use a power steering cooler that is about 3" *
> 5" and looks very rugged.  These are available on 90's models and
> later with many of these in the junk yard.  I think this would
> work well for your fuel cooler.

Hi Ken;
Thanks for the tip. I haven't had time to look in the wreckers and a quick
stop in an auto parts store didn't find one quickly. I didn't have much time
for an extensive catalogue search, but did find a generic cooler measuring
2.5"x9"x.75". So I ordered that one for $30.
In the meantime I made one at work. I've pressure tested it OK, and I'd
imagine it would work fine, but I think I'll wait until I get the one I
ordered, since it will have better fins.

Thanks. I'll let you know how it looks.

S. Todd Bartrim
Turbo 13B RV-9Endurance
C-FSTB
http://www3.telus.net/haywire/RV-9/C-FSTB.htm

   "Whatever you vividly imagine, Ardently desire, Sincerely believe in,
Enthusiastically act upon, Must inevitably come to pass".

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster