----- Original Message -----
From: "Marvin Kaye" <marv@lancaironline.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Tuesday, January 06, 2004 8:44 AM
Subject: [FlyRotary] Re: Radiator hose


> Posted for "sqpilot@earthlink" <sqpilot@earthlink.net>:
>
> Hi, fellow rotary enthusiasts....My custom radiator should arrive this
week,
> and it has -16 AN fittings on it, as does my water pump.  Anyone know of
the
> best source to buy the stainless steel braided -16 hose and fittings ?  I
have
> a Summit catalog, but don't know if there's a less expensive source out
there.
> Thank you.  Paul Conner
>
>
> [A lot of the guys in the Lancair community use Sacramento Sky Ranch to
> fabricate their hoses.  They have good pricing and excellent service...
their
> hoses are guaranteed, and they have been known to replace hoses that were
> actually specified incorrectly by the customer.  Check them out at
> http://www.sacskyranch.com/.
>
>            <Marv>               ]
> Hi, Marv...thanks for the info. I prefer to make my own hoses on the
aircraft, as I did for the oil and fuel. (I used to make/well hydraulic
hoses for a living). Those were only -10 and -6 sized. The -16 size is
harder to find. Summit Racing has them, plus the fittings, but rather
expensive.  Take care.  Paul Conner
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>