----- Original Message -----
Sent: Sunday, January 04, 2004 6:43
PM
Subject: [FlyRotary] rev-2, evap cores
everywhere
Greetings,
I couldn't resist sending
a picture of the evap core cluster. And, yes, there are all inside the
stock RV-3 cowl. The biggest physical hurdle remaining is the
intake. I should have David's intake on Tuesday, and hopefully, that
will all fall into place.
Cheers,
Rusty (gotta make an oil
scoop this week)
Nice looking
installation, Rusty. I see one potential problem, however. I feel
that those rectangular pieces of wood taped on the faces of the
cores might interfere with airflow. (Yes, I'm kidding). I know you have
done a lot of research on the internet in the past looking for hose and
fittings. I need to plumb my new radiator that is similar to your first
radiator, (with -16 AN fittings on both the radiator and the water pump), and
I'm looking for the best/least expensive source for the hose and fittings.
Where did you purchase yours? Thanks for the info and good luck on your
installation. Looks well planned and professional. Paul
Conner
>> Homepage: http://www.flyrotary.com/
>>
Archive:
http://lancaironline.net/lists/flyrotary/List.html