----- Original Message -----
Sent: Saturday, January 03, 2004 11:10
AM
Subject: [FlyRotary] Re: Help !!!
Not to worry. Look at the 4 bolt pattern. It can only be
mounted one way.
Finn
sqpilot@earthlink wrote:
I made an error. I removed the pulley
from my eccentric shaft. I turned the engine over with the electric
starter just for testing. Then I noticed there are timing marks on the
pulley. Was I smart enough to mark the shaft and pulley so I could put it
back in the same position? Of course not. Is there a
simple method of reinstalling the pulley so the timing marks are correct, or
do I have to take the engine all apart to fix this? My luck says I probably
have to do a complete tear-down to determine the pulley orientation.
Thanks for your replies and advice. Paul, the idiot
Conner