You might think about one of these:
http://www.defender.com/product.jsp?path=-1|311|302335|7364|939816&id=99692
Ready to go.
From: Rotary motors in
aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of shipchief@aol.com
Sent: Monday, March 01, 2010 8:47 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Ridge vent material
for the last couple of days, I've been building a new gas
transport tank to get mogas to the airport. We welded bungs in the side of a 55
gallon drum, and epoxy'd/screwed a cradle together. It mounts a Fill-Rite
12 volt transfer pump and 30 ft of hose. I plan to premix my gas/oil at the
filling station, then just pump it into the plane like a one customer fuel
truck! There is still one gas station here that sells ethanol free mogas.
The oil cooler diffuser looks 'pro' in black. With filler and DP90
primer, it's stiffer, so I had to trim the flanges back a bit to get it to
slide in place. I'm working on edge seals now that all the duct to cooler fits
are 3/8" or less. I'm trying adhesive foam strips from the auto parts store...