X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from bay0-omc2-s14.bay0.hotmail.com ([65.54.190.89] verified) by logan.com (CommuniGate Pro SMTP 5.3.2) with ESMTP id 4142262 for flyrotary@lancaironline.net; Mon, 01 Mar 2010 15:05:08 -0500 Received-SPF: pass receiver=logan.com; client-ip=65.54.190.89; envelope-from=stol83001@live.com Received: from BAY143-W18 ([65.54.190.125]) by bay0-omc2-s14.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.3959); Mon, 1 Mar 2010 12:04:31 -0800 Message-ID: Return-Path: stol83001@live.com Content-Type: multipart/alternative; boundary="_38964b2f-02a4-4b76-84da-888fdc93844d_" X-Originating-IP: [75.174.168.108] From: ben haas To: Subject: RE: [FlyRotary] Re: Ridge vent material Date: Mon, 1 Mar 2010 13:04:31 -0700 Importance: Normal In-Reply-To: References: MIME-Version: 1.0 X-OriginalArrivalTime: 01 Mar 2010 20:04:31.0198 (UTC) FILETIME=[67CAE7E0:01CAB97A] --_38964b2f-02a4-4b76-84da-888fdc93844d_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable The product Tracy is talking about is used in venting ridges.. it is called= Roll venting and comes in 40 foot rolls. =20 Ben Haas www.haaspowerair.com =20 To: flyrotary@lancaironline.net Date: Mon=2C 1 Mar 2010 06:33:11 -0800 From: tracy@rotaryaviation.com Subject: [FlyRotary] Re: Ridge vent material Hi Scott=2C I replied to Kevin's comment on the ridge vent material. It is very dif= ferent from what you or Kevin are talking about. See comments on reply to= Kevin. =20 Tracy On Sun=2C Feb 28=2C 2010 at 7:43 PM=2C wrote: Just quiet I guess. For filler=2C I can offer that I've been in the shop working on my oil cool= er diffuser=2C sanding=2C smoothing in microlight=2C sanding=2C painting. Y= ou all know the drill. It's hard to spread filler smoothly on the inside of= the duct where there isn't really any room for my hand=2C let alone a spre= ader=2C or later a sanding block! I've had good test runs since I bit the bullet and committed my time to mak= ing quality scoop and diffuser assemblies. I just hope they work as well wh= en I continue to test @ higher power setting=2C and eventually fly it! Tracy=3B when you refered to 'roof ridge material' as applied to the inside= of the cooler diffuser? did you mean the aluminum sheet with small louvers= ? When I blow sanding dust out thru the cooler and duct in assembly=2C usin= g compressed air=2C most of the dust seems to pass out the aft end of the c= ooler. I know microlite filler dust is heavier than air=2C but I think it w= ould be a fair representation of airflow when propelled with the air nozzl= e. So I'm taking what I understand you to have said=2C and may try to slow = down the air at the back so the air flow will be more evenly distributed th= ru the oil cooler. I made a more pronounced ramp in the radiator duct after reading about it i= n this forum=2C but I had already made the oil cooler diffuser. I might yet= carve out the back and build in that ramp!! but for now I would like to kn= ow what that material is??? Scott E -----Original Message----- From: Thomas Mann To: Rotary motors in aircraft Sent: Sun=2C Feb 21=2C 2010 4:03 pm Subject: [FlyRotary] Re: Test=3B no connectivity for two days One word: Olympics =20 From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Beh= alf Of DLOMHEIM@aol.com Sent: Sunday=2C February 21=2C 2010 5:52 PM To: Rotary motors in aircraft Subject: [FlyRotary] Test=3B no connectivity for two days =20 When I go to the newsgroup list it hasn't updated in two days now=3B so don= 't know if the server died or if the list is just really quiet... =20 Doug Lomheim 9A=3B OK City=2C OK =20 _________________________________________________________________ Hotmail: Free=2C trusted and rich email service. http://clk.atdmt.com/GBL/go/201469228/direct/01/= --_38964b2f-02a4-4b76-84da-888fdc93844d_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable The product Tracy is talking about is used in venting ridges.. it is called= Roll venting and comes in 40 foot rolls. =3B


Ben Haas
www.haaspowerair.c= om



 =3B
To: flyrotary@lancaironline.net
Date: Mon=2C 1 Mar 2010 06:33:11 -0800From: tracy@rotaryaviation.com
Subject: [FlyRotary] Re: Ridge vent mat= erial

Hi Scott=2C
 =3B =3B I replied to Kevin's comment on the ridge vent materi= al. =3B It is very different from what you or Kevin are talking about.&= nbsp=3B =3B See comments on reply to Kevin.
 =3B
Tracy

On Sun=2C Feb 28=2C 2010 at 7:43 PM=2C <=3Bshipchief@aol.com>= =3B wrote:
Just quiet I guess.
For filler=2C I can offer that I've been in the shop working on my oil= cooler diffuser=2C sanding=2C =3Bsmoothing =3Bin =3Bmicrolight= =2C sanding=2C painting. You all know the drill. It's hard to spread filler= smoothly on the inside of the duct where there isn't really any room for m= y hand=2C let alone a spreader=2C or later a sanding block!
I've had good test runs since I bit the bullet and committed my time t= o making quality scoop and diffuser assemblies. I just hope they work as we= ll when I continue to test @ higher power setting=2C and eventually fly it!=
Tracy=3B when you refered to 'roof ridge material' as applied to the i= nside of the cooler diffuser? did you mean the aluminum sheet with small&nb= sp=3Blouvers? When I blow sanding dust out thru the cooler and duct in asse= mbly=2C using compressed air=2C most of the dust seems to pass out the aft = end of the cooler. I know microlite filler dust is heavier than air=2C but = I think it would be a fair representation =3B of airflow when propelled= with the air nozzle. =3BSo I'm taking what I understand you to have sa= id=2C and may try to slow down the air at the back so the air flow will be = more evenly distributed thru the oil cooler.
I made a more pronounced ramp in the radiator duct after reading about= it in this forum=2C but I had already made the oil cooler diffuser. I migh= t yet carve out the back and build in that ramp!! but for now I would like = to know what that material is???
Scott E


=


Hotmail: Free=2C trusted and rich email s= ervice. Get it now. = --_38964b2f-02a4-4b76-84da-888fdc93844d_--