|
|
Posted for msteitle@mail.utexas.edu:
Rusty,
Have you considered using 1/2" blue foam cut to a taper? Bond in place with
epoxy/flox, final shape, and cover with 4 layers of glass cloth. Mark S.
Lancair ES/20B
My question for you fiberglass masochists out there- What's the best way to
fix this? On BUC, I cut the front ring loose, repositioned it, and glassed
over it. I don't want to do that again. What I would like to do, is use
some sort of filler, putty, ???, to fill in the gap. What substance would
you recommend to use for this? Ideally, this will be something thick, that
can be molded in shape, then final sanded after it hardens.
|
|