Return-Path: Received: from [216.52.245.18] (HELO ispwestemail1.mdeinc.com) by logan.com (CommuniGate Pro SMTP 4.1.8) with ESMTP id 2905570 for flyrotary@lancaironline.net; Thu, 25 Dec 2003 22:20:00 -0500 Received: from 7n7z201 (unverified [208.187.45.40]) by ispwestemail1.mdeinc.com (Vircom SMTPRS 3.0.273) with SMTP id for ; Thu, 25 Dec 2003 19:19:59 -0800 Message-ID: <003a01c3cb5f$25e0ffa0$282dbbd0@7n7z201> From: "William" To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Re: thrust angles, and fiberglass question Date: Thu, 25 Dec 2003 21:19:11 -0600 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0032_01C3CB2C.BD604B70" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 This is a multi-part message in MIME format. ------=_NextPart_000_0032_01C3CB2C.BD604B70 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable MessageAnother technique is to build a short dam around the area, and = use a little pour-foam. After it hardens you can shape it to final = shape, and then glass right over it. Acts like a stiffener. Bill Schertz KIS Cruiser # 4045 ----- Original Message -----=20 From: John Slade=20 To: Rotary motors in aircraft=20 Sent: Thursday, December 25, 2003 9:07 PM Subject: [FlyRotary] Re: thrust angles, and fiberglass question My question for you fiberglass masochists out there- What's the best = way to fix this? Rusty, I'd use modelling clay for a problem like this. You can mold it = easily, get it perfectly smooth, glass over it and remove it after cure. = John Slade ------=_NextPart_000_0032_01C3CB2C.BD604B70 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Message
Another technique is to build a short = dam around=20 the area, and use a little pour-foam. After it hardens you can shape it = to final=20 shape, and then glass right over it. Acts like a stiffener.
Bill Schertz
KIS Cruiser # 4045
----- Original Message -----
From:=20 John=20 Slade
Sent: Thursday, December 25, = 2003 9:07=20 PM
Subject: [FlyRotary] Re: thrust = angles,=20 and fiberglass question

My=20 question for you fiberglass masochists out there- What's the best way = to fix=20 this?
 
Rusty,
I'd use modelling clay for a problem like this. You can = mold it=20 easily, get it perfectly smooth, glass over it and remove it = after=20 cure.
John = Slade
------=_NextPart_000_0032_01C3CB2C.BD604B70--