|
Rino,
Mark Steitle recently posted that he was using the Renesis plugs in his 3 rotor
20B and reported good service although I do not remember how many hours
he reported at that time...............Jump in here Mark and give us an update on
how these plugs are doing...............
--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold
-------------- Original message from "Rino" <lacombr@nbnet.nb.ca>: --------------
How long do the sparkplugs should last on the Renesis engine.
My engine is starting to run rough and I suspect the plugs.
I have to say that it is also running too cold, it goes down to about 160 F (oil and water) when comming in for a landing which is usually 3500 rpm. I have the NGK iridium plugs, lead RE7C and trail RE9B.
I am trying to warm up by blocking the radiators at the moment. OAT between 30 and 40 F.
I will have to build shutters to control the engine temp.
Last month the engine was too hot, now it is too cold. I did modify the air ducts and change the oil rad for the original RX7 rad.
Rino Lacombe
Renesis powered Glass Goose
|