X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from mail-bw0-f227.google.com ([209.85.218.227] verified) by logan.com (CommuniGate Pro SMTP 5.2.16) with ESMTP id 3861741 for flyrotary@lancaironline.net; Mon, 21 Sep 2009 21:48:54 -0400 Received-SPF: pass receiver=logan.com; client-ip=209.85.218.227; envelope-from=msteitle@gmail.com Received: by bwz27 with SMTP id 27so2355278bwz.19 for ; Mon, 21 Sep 2009 18:48:18 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:in-reply-to:references :date:message-id:subject:from:to:content-type; bh=Bf7iBfjB1BxESLTNRgFga9KLyjQf61+7XpNMZudQyw8=; b=t1ePty+19YEzOXk3wfZsARXrUsLH7AQrUHnV+ey2mGgLMmO+lKEhq+Cn+43QqQAcVN 0FWwBTi7C0YOYlekrzLLwuO7X7nOvAhhrLaZj3MsPmZz4UZX31wEOBmuCAwm43Dw7XCE 6alroihltH7x5ceeOmu/zZxQ1mEJot5OP/RdM= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type; b=ekPcrFptoCGt6v4pwfva2J/BgK6HHUdXjlK8MQSwIS1uwifMDN6Qz3PdRZO+eWzOrK OT3eSiZ0fFh1yFqTT+ibdKIfXYy1eh0Btg1EpaRvKU0w+0XS2Ba09jfSFdkppE7exKXs VXQEnyj4V+a85Ahh86sCwJBarb7DK03GrBma0= MIME-Version: 1.0 Received: by 10.204.154.83 with SMTP id n19mr289949bkw.121.1253584098120; Mon, 21 Sep 2009 18:48:18 -0700 (PDT) In-Reply-To: References: Date: Mon, 21 Sep 2009 20:48:18 -0500 Message-ID: <5cf132c0909211848i5e5fd00dw25ce562715b8809d@mail.gmail.com> Subject: Re: [FlyRotary] Re: Progress report from Houston From: Mark Steitle To: Rotary motors in aircraft Content-Type: multipart/alternative; boundary=0015175cac56dd565b047420ca98 --0015175cac56dd565b047420ca98 Content-Type: text/plain; charset=ISO-8859-1 No, they're plates that fit over the 2" SS tubes and bolt to the rotor housing. You use RTV to make a seal between the sealing plate, rotor housing and SS tube. Look closely at the picture I posted, and then check the web link. The web page shows the entire process start to finish. http://www.rotaryeng.net/Welded-steel-p-port.html Mark On Mon, Sep 21, 2009 at 8:39 PM, George Lendich wrote: > Mark, > What are PL's sealing plates are these the sides plates he uses to pressure > the sealant? > George ( down under) > > Kelly, > > Yes, I TIG welded them to the inner liner, then used PL's sealing plates > and Ultra Grey RTV to seal off the coolant. I plan to pressure test them > prior to assembly. > > Mark > > On Mon, Sep 21, 2009 at 2:41 PM, Kelly Troyer wrote: > >> Mark, >> Have you made any decisions on the retension/sealing method for your 20B >> "P" port inserts ?? >> -- >> Kelly Troyer >> "Dyke Delta"_13B ROTARY Engine >> "RWS"_RD1C/EC2/EM2 >> "Mistral"_Backplate/Oil Manifold >> >> -------------- Original message from Mark Steitle : >> -------------- >> >> Bill, >> >> I'm not sure what's changed, but my oil temps are up from what I reported >> earlier. I routinely see 220-225 on climbout, then they settle down to 200 >> in cruise. Maybe I'm producing more hp now, or maybe the earlier >> temperature report was not in mid-summer, or possibly my system is not >> cooling as well as it did earlier. I'm just glad that I installed TES >> o-rings throughout. >> My cowl flap initially had an aluminum lip, that protruded into the >> airstream about 1". This was a quick and dirty test to see the result. I >> couldn't open or close it, it was open all the time. I have since replaced >> the 1" lip with a servo-controlled door so I can open/close as desired. >> When closed it is the same as a stock cowl. This is very helpful in cooler >> climates, not so much during triple-digit Texas summer months. >> >> I also added an "airfoil shaped" piece on the firewall directly above the >> cowl flap opening. This was done in the hope of helping coax the heated air >> out of the cowl. But I didn't detect any great improvement in cooling. Oh, >> well. Next thing I plan on adding is small air dams on each end of the flap >> door. The idea here is to promote more efficient airflow out of the cowl >> flap. I've heard that these make a big difference. We'll see. >> If you are considering installing a cowl flap, you may want to consider >> locating it on the side, or possibly install one on each side, back near the >> firewall. This would allow you to make the opening larger, and this >> location may be in a lower pressure area than the bottom, especially during >> climbout. Just a thought. >> >> Cooling is still marginal in the Texas heat, and it will be worse with the >> new P-port 20B engine. So, I may be forced to make some major changes to >> get the more powerful engine to cool, or else be forced to throttle back >> during climbout. I've been considering relocating the radiator from under >> the engine to the cool side of the engine (fore/aft). This would allow me >> to use a slightly larger radiator. It would clean up the plumbing and >> significantly shorten the cooling lines too. >> No, I haven't experienced SAG. But then I'm running Renesis type irridium >> spark plugs. I'm at 143 hours now. Personally, I won't use anything else. >> >> >> Mark >> >> >> > --0015175cac56dd565b047420ca98 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable
No, they're plates that fit over the 2" SS tubes and bolt to = the rotor housing.=A0 You use RTV to make a seal=A0between the sealing plat= e, rotor housing and SS tube.=A0 Look closely at the picture I posted, and = then check the web link.=A0 The web page shows the entire process start to = finish.=A0 ht= tp://www.rotaryeng.net/Welded-steel-p-port.html
=A0
Mark

On Mon, Sep 21, 2009 at 8:39 PM, George Lendich = <lendich@aanet= .com.au> wrote:
Mark,
What are PL's sealing plates=A0are= these the sides plates he uses to pressure the sealant?
George ( down under)
Kelly,
=A0
Yes, I TIG welded them to the inner liner, then used PL's sealing = plates and Ultra Grey RTV to seal off the coolant.=A0 I plan to=A0pressure = test them prior to assembly.
=A0
Mark

On Mon, Sep 21, 2009 at 2:41 PM, Kelly Troyer <kel= tro@att.net> wrote:
Mark,
=A0 Have you made any decisions on the retension/sealing method for yo= ur 20B "P" port inserts ??
--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
&q= uot;RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold <= /div>
-------------- Original message from Mark Steitle <msteitle@gmail.com>= ;: --------------

Bill,
=A0
I'm not sure what's changed, but my oil temps are up from what= I reported earlier.=A0 I routinely see 220-225 on climbout, then they sett= le down to 200 in cruise.=A0 Maybe I'm producing more hp now, or maybe = the earlier temperature report was not in mid-summer, or possibly my system= is not cooling as well as it did earlier.=A0 I'm just glad that I=A0in= stalled TES o-rings throughout.=A0
My cowl flap initially had an aluminum lip, that=A0protruded into the = airstream=A0about 1".=A0 This was a quick and dirty test to see the re= sult.=A0=A0I couldn't open or close it, it was open all the time.=A0 I = have since replaced the 1" lip with a servo-controlled=A0door so I can= open/close as desired.=A0 When closed it is the same as a stock cowl.=A0 T= his is very helpful in cooler climates, not so much during triple-digit Tex= as summer months.
=A0
I also added an "airfoil shaped" piece on the firewall direc= tly above the cowl flap opening.=A0 This was done=A0in the hope=A0of helpin= g coax=A0the heated air out of=A0the cowl.=A0 But I didn't detect any g= reat improvement in cooling.=A0 Oh, well.=A0=A0Next thing I plan on adding = is small air dams on each end of the flap door.=A0 The idea here is to prom= ote more efficient airflow out of the cowl flap.=A0 I've heard that the= se make a big difference.=A0 We'll see.=A0=A0=20
=A0
If you are considering installing a cowl flap, you may want to conside= r locating=A0it on the side, or=A0possibly install one on=A0each side, back= near the firewall.=A0 This would allow you to make=A0the opening=A0larger,= and this location=A0may=A0be=A0in a lower pressure area than=A0the bottom,= especially during climbout.=A0 Just a thought.
=A0
Cooling is still marginal in the Texas=A0heat, and=A0it will be worse = with=A0the new P-port 20B engine.=A0 So, I may be forced to make some major= changes to get the more powerful=A0engine to cool, or else be forced to th= rottle back during climbout.=A0 I've=A0been considering=A0relocating th= e radiator from under the engine to=A0the cool side of the engine (fore/aft= ).=A0 This would allow me to use a slightly larger radiator.=A0 It would cl= ean up the plumbing and significantly shorten the cooling lines too.=A0=A0= =A0
No, I haven't experienced SAG.=A0 But then I'm running Renesis= type irridium spark plugs.=A0 I'm at 143 hours now.=A0 Personally, I w= on't use anything else.=A0
=A0
Mark
=A0

=

--0015175cac56dd565b047420ca98--