X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from smtp102.sbc.mail.re2.yahoo.com ([68.142.229.103] verified) by logan.com (CommuniGate Pro SMTP 5.2.16) with SMTP id 3858653 for flyrotary@lancaironline.net; Fri, 18 Sep 2009 13:09:16 -0400 Received-SPF: none receiver=logan.com; client-ip=68.142.229.103; envelope-from=downing.j@sbcglobal.net Received: (qmail 85766 invoked from network); 18 Sep 2009 17:08:41 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=sbcglobal.net; h=Received:X-YMail-OSG:X-Yahoo-Newman-Property:Message-ID:From:To:Subject:Date:MIME-Version:Content-Type:X-Priority:X-MSMail-Priority:X-Mailer:X-MimeOLE; b=Et4BnArqwShVDTIxO8SilMY2OrKnAPYYEvMtKuNq4JpWjKIlfbCT/wzeQkD4++wagCGk0bl5leWz4OkOOiYAhEvelpYzoYzBuw7r94rfgwEL3swMwocCaYkxzPfw3LEAXOqEoJ4y7eVm4pX/MaBibj7mPIhglU8z9Pb5oMUgHH0= ; Received: from unknown (HELO JohnPC) (downing.j@76.210.117.18 with login) by smtp102.sbc.mail.re2.yahoo.com with SMTP; 18 Sep 2009 17:08:40 -0000 X-YMail-OSG: zyRnJKIVM1m3HMYyzgoLAgwz5gMf7wgMj2meHb0P.gMBG1NDX3QHkGvAQqY911vE8q7Guleej4f7d2sQrIlmGTw0D4ChD_MYNq4.yfLCCylHrYoIGPVUHLlImeFp6HDB3tv5hZRGF82T_ylP9tlNvjtwFuqtI6CVv1bnyk_.jzZjeJBqFbKT3cgjHFZAEaIxRqhTqhrzfZLOJKC6s9I4cWZmz.1rojtbf8DDSQ0_Nz4_zS3xydVcAk.CuaW0z7QGHX2hYuvrzfjMJjU- X-Yahoo-Newman-Property: ymail-3 Message-ID: <3D4A7AB534094D1DA418A54CF2D90F62@JohnPC> From: "John" To: "flyrotary" Subject: Mixture Condition Date: Fri, 18 Sep 2009 13:08:43 -0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0023_01CA3861.25DBDEB0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Windows Mail 6.0.6002.18005 X-MimeOLE: Produced By Microsoft MimeOLE V6.0.6002.18005 This is a multi-part message in MIME format. ------=_NextPart_000_0023_01CA3861.25DBDEB0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I have narrowed the mixture condition down to the fact that when it = starts to miss up I can keep it running poorly by turning the mixture = control down to minimum, but if I turn off the primary injectors switch = the engine appears to run okay, the secondary injector switch doesn't = seem to make any difference in the way it runs at 4000 rpm or idle. The = injector switches as well as the wiring harness I purchased from Bob and = all wires are soldered and covered with heat shrink. I checked the best = I can with a light and mirror and everything looks okey under the panel. = It runs the same, rather in mode A or B. On rereading the instructions = I see that the coil disable can only be checked in mode B, so I haven't = done that yet. =20 I turned of the fuel pump and with the injector switch's off the engine = continued to run until the fuel press was down to 17 pds. and quit. I = turned on the fuel pump (LP) to the Weber and it started immediatly. = This condition started at 7.2 on the hour meter. I really now don't = have any idea where to start looking for the problem. JohnD ------=_NextPart_000_0023_01CA3861.25DBDEB0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

I have narrowed the mixture condition = down to the=20 fact that when it starts to miss up I can keep it running poorly by = turning the=20 mixture control down to minimum, but if I turn off the primary injectors = switch=20 the engine appears to run okay, the secondary injector switch = doesn't=20 seem to make any difference in the way it runs at 4000 rpm or = idle. The=20 injector switches as well as the wiring harness I purchased from Bob and = all=20 wires are soldered and covered with heat shrink. I checked the = best I can=20 with a light and mirror and everything looks okey under the panel. = It runs=20 the same, rather in mode A or B. On rereading the instructions I = see that=20 the coil disable can only be checked in mode B, so I haven't done that=20 yet.

I turned of the fuel pump and with the = injector=20 switch's off the engine continued to run until the fuel press was down = to 17=20 pds. and quit. I turned on the fuel pump (LP) to the Weber and it = started=20 immediatly. This condition started at 7.2 on the hour meter. = I=20 really now don't have any idea where to start looking for the = problem. =20 JohnD

------=_NextPart_000_0023_01CA3861.25DBDEB0--