|
John,
Mine was built up from parts by Bruce Turrentine. I
made an aluminum plate that said :
Schertz Rotary 13-B
Serial Number 001
And bonded it to the small flat area on top of the
engine, just above the primary injector ports on the center iron. I had a local
shop engrave the information into the aluminum (they want it 'permanent' in case
you burn it up).
Bill Schertz
KIS Cruiser #4045
N343BS
Phase I testing
----- Original Message -----
Sent: Friday, May 15, 2009 8:22 AM
Subject: [FlyRotary] Paper work
On the Affidavit of Ownership Form AC FORM
8050-88, it ask for SN of engine. This engine was built by Atkins from
new parts and I don't see any SN on the bill or the engine, how are you
folks addressing this on the form. Non certified aircraft engines have
the tag removed, so there is no serial number on those either.
JohnD
|