Bobby,

 

I don’t have an EM3 so I don’t know what data it collects or how to access it.

 

The data on the plot was collected using an NSBASIC program developed for this purpose and uses the same IPAQ as used with my Anywhere Map GPS system.  The physical connection between the IPAQ and the EC2 uses a ground and the two serial data lines from the EC2 with circuitry to translate the 5V logic level signals to RS232 levels.  The data collected by the IPAQ is transferred to an EXCEL spreadsheet for analysis.

 

Steve Boese

 

 

  

 

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Bobby J. Hughes
Sent: Wednesday, April 22, 2009 10:51 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: EC2 address range issue

 

Steve,

 

May I ask how you collected the data?  I have the data logger option with the EM3 but no information on what it collects.   Thanks, Bobby