Mailing List flyrotary@lancaironline.net Message #45269
From: Bob Perkinson <bobperk90658@bellsouth.net>
Subject: Re: [FlyRotary] First start
Date: Thu, 26 Feb 2009 04:47:51 +0000
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Low oil level?
Plugged or partially plugged oil pick up, gasket material partly blocking suction.
Half moon key fell out of shaft when oil pump assembled. I think someone on the list had that problem.

I am sure that others on the list can think of even more scenarios.

Bob Perkinson
RV-9 Finish Kit arrived, someone at Van's gets wild with the staple gun when they close up that big box.  They must get paid by the staple.  


 
-------------- Original message from "The Mallorys" <candtmallory@cebridge.net>: --------------

She’s alive!

 

I had my first start today.  She sounded good, but the oil stayed at 3-4 PSI, so I shut her down.  I opened the line from the oil cooler to filter to see if I was pumping anything.  There was a little oil there, it didn’t gush out, but it was there. 

 

So now I have to figure out why I don’t have pressure.  I’m open to any ideas or suggestions.

 

Chris

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster