Received-SPF: pass
 receiver=logan.com; client-ip=211.29.132.183; envelope-from=lendich@optusnet.com.au
Message-ID: <000e01c8faac$934a5420$6400a8c0@george>
From: "George Lendich" <lendich@optusnet.com.au>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-3069300@logan.com>
Subject: Re: [FlyRotary] Re: exhaust manifold
Date: Sun, 10 Aug 2008 15:47:26 +1000
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="Windows-1252";
	reply-type=original
Content-Transfer-Encoding: 7bit


Michael,
3 x 34's would do it for a 2 rotor. I have been looking for a carb for my 
single but would require a 44mm and thought a couple of smaller carbs might 
do it - the bigger carbs get expensive. The only problem with more than one 
carb is you need to balance them, but for a ingle rotor they could be 
staged.
I didn't know the Suzuki's had Mikuni carbs, I might look out for some of 
those.
George ( down under).

> Geroge:
>
> Those are 34 mm throat Mikkunis. Got them of ebay for 25$. They came of a
> late 80s Suzuki SX 650 most SXs have the same carbs. The 1100 cc version 
> of
> the bike has 4 of them and the 450cc has 2 of them. They are the same 
> thing
> Tracy first used.  I however would like to use a single gravity feed carb. 
> I
> know the 3 Mikuni's  will work as both Finn Lassen and Tray flew on them 
> but
> they do require a fuel pump and I would like to try and go for a purely
> garvity fed system just for the sake of simplicity.
>
> Michael
>
>
> ----- Original Message ----- 
> From: "George Lendich" <lendich@optusnet.com.au>
>>
>> Michael,
>> What size are those carbs?
>> George ( down under)
>>
>
>
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub: 
> http://mail.lancaironline.net:81/lists/flyrotary/List.html