From: "Kelly Troyer" To: "Rotary motors in aircraft" Subject: [FlyRotary] Sealling oil pan motor mount hole Date: Tue, 22 Jul 2008 22:52:13 +0000 Content-Type: Multipart/alternative; boundary="NextPart_Webmail_9m3u9jl4l_20763_1216774022_1" --NextPart_Webmail_9m3u9jl4l_20763_1216774022_1 Content-Type: multipart/related; boundary="NextPart_Webmail_9m3u9jl4l_9909_1216767089_1" --NextPart_Webmail_9m3u9jl4l_9909_1216767089_1 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable

Keith,

In an ideal situation you could find an 1984-5 RX7 13B pa= n that does not have that

extra bolt hole in it as the mounts were still on the front cover.....= ......But since you

probably cannot find one I have a question.........Since I am not tota= lly familar with the

CCI mount plate is the spot on the plate under the extra oil pan bolt = open or would

you have to drill a hole for access to the threaded boss in the center= housing ?..........

I do not remember what the bolt size is (probably 12 or 14 mm) = but if this hole fits

flush with the CCI plate then a large headed bolt and copper gasket mi= ght seal it !!

FWIW

--
Kelly Troyer
"Dyke Delta"_1= 3B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifol= d

-------------- Original message from ktradcliff@comcast.net:= --------------

> I am using the stock 13b oil pan along wit= h the cci motor mount. The stock 13b
> oil pan has 3 motor mount hol= es that are utilized when mounted in the car. In
> aircraft applicat= ion with the cci mount only two of the three bolt holes are
> used. = I am looking for the best method to seal this extra hole. Are some
>= choosing to weld this hole (although this is a very important piece to the= bed
> mount and needs to maintain a good seal, and a bad weld may w= arp the thin pan)?
> Or would a locking nut and bolt with some type = of gasket maker do the trick?
> Possible some type of expandable plu= g like the ones used in a boats? Not sure
> what to do looking for t= he best answer.
>
> Thanks
> Keith
> RV-7A
= > 13b
> With=20all of Tracy's stuff
> CCI Engine mount >
> --
> Homepage: http://www.flyrotary.com/
> Arc= hive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html =

--NextPart_Webmail_9m3u9jl4l_9909_1216767089_1-- --NextPart_Webmail_9m3u9jl4l_20763_1216774022_1--