|
|
Hi Bill,
You just have to find the right navigation links on Tracy's web site.
Try this: http://www.rotaryaviation.com/fuel_pumps.htm
They are under Aviation Products -> Aero Engine Extras on the main page.
Bob W.
On Thu, 29 May 2008 14:34:17 -0400
"Bill Bradburry" <bbradburry@bellsouth.net> wrote:
> Tracy, Do you still sell the FI fuel pumps? I didn't see them on your web
> site. I will probably need to replace one of mine since I discovered the
> "black sludge" in the filter.
>
> If you don't still sell them, could you suggest a supplier?
>
>
>
> Bill Bradburry
>
>
>
> _____
>
> From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
> Behalf Of Tracy Crook
> Sent: Thursday, May 29, 2008 9:40 AM
> To: Rotary motors in aircraft
> Subject: [FlyRotary] Re: [FlyRotary]Turbochargers
>
> I get 3 - 5 emails or calls every day from builders surprised that things
> don't seem to be fitting together. There seems to be some kind of
> expectation that the whole world is standardized around this one of a kind
> airplane they are building. Don't *expect* anything to fit unless you have
> verified it or made it fit yourself.
>
>
>
> OK, enough kvetching from me.
>
>
>
> It doesn't make sense to throw away those $250 injectors (Mazda price) and
> buy something to fit those little chunks of aluminum you bought. Put the
> injector bungs in a lathe and turn them out to fit. Or start with a fresh
> chunk and make from scratch.
>
> I doubt you could replace those rather unique 20B primary injectors no
> matter how badly you wanted to. Again, the world is not standardized
> around that very rare orphaned car engine you are putting in the plane.
>
>
>
> Tracy
>
> On Thu, May 29, 2008 at 3:18 AM, Greg Ward <gregw@onestopdesign.biz> wrote:
>
> Hey Tracy;
>
> The injector bosses from SDS arrived today, and the Mazda injectors don't
> fit (big surprise). What do I use instead, and what size? Should I also
> replace the ones in the block, or go with them for a while? Will this make
> any difference in the ECU mapping?
>
> Thanks;
>
> Greg
>
> ----- Original Message -----
>
> From: Tracy Crook <mailto:tracy@rotaryaviation.com>
>
> To: Rotary motors in aircraft <mailto:flyrotary@lancaironline.net>
>
> Sent: Wednesday, May 28, 2008 10:54 PM
>
> Subject: [FlyRotary] Re: [FlyRotary]Turbochargers
>
>
>
> AFIK, Tom Parks is the only other 20B turbo flying (very few hours). I
> don't know the specs. or even the make but I think it was a Turbonetics.
>
>
>
> Ain't it fun being a pioneer? :>)
>
>
>
> Tracy (admiring my painted -8 fuse)
>
> On Wed, May 28, 2008 at 1:40 PM, Greg Ward <gregw@onestopdesign.biz> wrote:
>
> I need to know what turbos you guys have had the best experience with on
> 20B's. I have to go buy one quickly as my welder guy is moving faster than
> I thought. The suppliers are only guessing. I plan on using a manual
> wastegate, and a 90 mm throttle body. HELP!!
> Greg Ward
> Lancair 20B in accelerated progress
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub:
> http://mail.lancaironline.net:81/lists/flyrotary/List.html
>
>
>
>
>
>
--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/cables/
|
|