Mailing List flyrotary@lancaironline.net Message #42386
From: Tracy Crook <tracy@rotaryaviation.com>
Sender: <rwstracy@gmail.com>
Subject: Re: [FlyRotary] Engine Mount Sump Plate
Date: Fri, 18 Apr 2008 09:59:39 -0400
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
Really?   All of them?   Doesn't sound right.   Ask the supplier of the plate.
 
Tracy

On Fri, Apr 18, 2008 at 2:20 AM, Greg <greg@itmack.com> wrote:
I'm finishing the plate between the sump and engine and the I've noticed the sump bolt holes are 8mm diameter for 6mm bolts which is rather large.  Is this to allow for heat expansion?  The standard clearance hole is 6.5mm and I'm wondering if I should use the 8mm hole size in the plate.
 
Greg RV8 Renesis

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster