Kelly,

An ebay search for “zetex 500” will bring up a nearly full 50 yard roll x 60” for $50 + $70 S&H.

There may be enough folks interested to share the buy.  Ten or more would make the cost very reasonable.

Chris Sargent

Jarret and All,

       Does anyone know which "ZETEX" product was used by the "Lancair"

guys on the list ?.........Below is the link to the company that manufactures

this product..........FWIW

 

http://www.newtex.com/index.html

--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold

----- Original Message -----

From: H & J Johnson

To: Rotary motors in aircraft

Sent: Monday, March 03, 2008 8:33 PM

Subject: [FlyRotary] Re: Exhaust? was [FlyRotary] engine installation pictures

 

Anyone on here use Zetex? It's supposed to do wonders for exhaust which is routed near

fiberglass. Just use high temp Silicone to bond it to the cowl [and/or duct] and it

solves all your problems.. I know there was guys over on the Lancair side of the list

who where doing group buy's.. not sure if any of it is left to go around.. It's supposed to

be as good as kevlar is bullet proof..

FWIW

Jarrett