|
John; I believe the concensus is for the vacume signal to be taken from the dynamic chamber, not any single/set of intake runners, I had to move mine from factory vacume ports near eng. end of runners to newly created (easly done ) three ports near throttle body, MAP-A, MAP-B & center one goes to fuel pres. reg. I'll send you a pic. of mine to your e-mail (need to learn how to down-size photos so I can get them on "The List") David, RV-6A Rotary in MI.
-------------- Original message --------------
From: "John Downing" <downing.j@sbcglobal.net>
On the EC2 there are two vacuum connectors. I have a vacuum line from each rotor (13B) going to the panel, does it matter which vacuum line I connect to the right or left EC2 connector. Hope that question came out right. JohnD
|