Received-SPF: pass
 receiver=logan.com; client-ip=75.180.132.120; envelope-from=eanderson@carolina.rr.com
Message-ID: <004201c809a3$37a09850$2402a8c0@edward2>
From: "Ed Anderson" <eanderson@carolina.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-2374443@logan.com>
Subject: Re: [FlyRotary] Mazda video on how to make a rotary....
Date: Mon, 8 Oct 2007 08:03:19 -0400
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=original
Content-Transfer-Encoding: 7bit

When my engine swallowed and apex seal, a piece of it flew back and got 
squished by the next apex seal area and actually caused a corner of the 
rotor to crack.  So it appeared to be harder than the rest of the rotor 
which was soft enough for the metal to smear.  Interesting videos for sure, 
thanks for sharing, Marc

Ed
----- Original Message ----- 
From: "Marc Wiese" <cardmarc@charter.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Sunday, October 07, 2007 9:48 PM
Subject: [FlyRotary] Mazda video on how to make a rotary....


http://www.mazda.com/mazdaspirit/rotary/howto/index.html

Interesting. I never heard about the high frequency RF hardening of the apex
seal slot area before.....!
Marc Wiese
==================================================
Fellow RE enthusiast.

Mazda Japan has released a very interesting set of small videos that detail
how it creates and builds its Rotary Engines.


http://rotarynews.com/node/view/950


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub: 
http://mail.lancaironline.net:81/lists/flyrotary/List.html