Received-SPF: pass
 receiver=logan.com; client-ip=24.25.9.103; envelope-from=eanderson@carolina.rr.com
Message-ID: <000c01c7b9ad$b2f2dd10$2402a8c0@edward2>
From: "Ed Anderson" <eanderson@carolina.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-2145968@logan.com>
Subject: Re: [FlyRotary] Re: Buly EC2 Repair  (beginning to understand the problem)
Date: Thu, 28 Jun 2007 13:56:48 -0400
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=original
Content-Transfer-Encoding: 7bit

Hi Bob,

I think the EC2 program panel problem pretty much explains why your EC2 loan 
did not do any good - the Ec2 module apparently was not the problem but the 
program control panel - which I presume Buly used when he tried  your EC2.

Ed

----- Original Message ----- 
From: "Bob White" <rlwhite@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, June 28, 2007 1:36 PM
Subject: [FlyRotary] Re: Buly EC2 Repair (beginning to understand the 
problem)


> Hi Buly,
>
> I think this is really good news.  Much better to have a reason for the
> problem and in this case, it cropped up at a very good time (NOT
> flying).
>
> Sorry for the late reply, but I'm trying to get thru 230 Flyrotary
> messages waiting for me after a 10 day vacation.  I've read about 200
> of them and have 85 to go.  They just keep coming in. :)
>
> Bob W.
>
>
> On Fri, 22 Jun 2007 17:51:39 -0400
> Bulent Aliev <atlasyts@bellsouth.net> wrote:
>
>> Thanks Tracy. I sent it because had a feeling that there could be a
>> problem also. It was modified since the canopy was pushing down on
>> the connector.
>> Buly
>>
>>
>> On Jun 22, 2007, at 10:38 AM, Tracy crook wrote:
>>
>> >
>> > Buly,
>> > I was preparing to ship your EC2 & EM2 back after repairs when I
>> > noticed the EC2 control panel in the bottom of the box you sent.
>> > I normally don't need this when repairing EC2s but yours turned out
>> > to be an exception.  I noticed what I thought to be more shipping
>> > damage.  The connector was bent down at a considerable angle.  On
>> > closer observation it was apparent that this was an intentional
>> > modification as the solder connections had been reheated and the
>> > connector solder pins bent down while pulling them  out of the
>> > board.  The solder connections had been re-soldered.   During this
>> > process a couple of the connections were broken.  This caused
>> > several of the programming modes to be disabled and even worse, the
>> > Mode selected on the thumbwheel switch was not always what was
>> > actually being programmed.   To say the least, this is a formula
>> > for disaster.
>> >
>> > Don't do this to my babies!  If it won't fit in the location you
>> > are trying to fit it in, find another location or modify the
>> > location, NOT THE EC2!
>> >
>> > I'll try to get this fixed before leaving next Tuesday but it'll be
>> > close.  No promises though.
>> >
>> > Tracy
>> >
>> >
>> >
>> > --
>> > Homepage:  http://www.flyrotary.com/
>> > Archive and UnSub:   http://mail.lancaironline.net:81/lists/
>> > flyrotary/List.html
>>
>>
>> --
>> Homepage:  http://www.flyrotary.com/
>> Archive and UnSub: 
>> http://mail.lancaironline.net:81/lists/flyrotary/List.html
>
>
> -- 
> N93BD - Rotary Powered BD-4 - http://www.bob-white.com
> 3.8 Hours Total Time and holding
> Cables for your rotary installation - http://www.roblinphoto.com/shop/
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub: 
> http://mail.lancaironline.net:81/lists/flyrotary/List.html