Received-SPF: none
 receiver=logan.com; client-ip=206.18.177.54; envelope-from=rlwhite@comcast.net
Date: Wed, 27 Jun 2007 22:11:00 -0600
From: Bob White <rlwhite@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Amazing Transformation
Message-Id: <20070627221100.5dd4e6f5.rlwhite@comcast.net>
In-Reply-To: <list-2144429@logan.com>
References: <list-2144429@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Even better if it would take the lead off those spark plugs. :)  I have
to agree with you on the first photos Ed.  Hard to tell the
difference.  But - if you use some image manipulator program and
increase the brightness quit a bit, it shows up there too.  I use
ImageMagic and The Gimp.  I'm amazed at how much detail a lot of
digital photos have if the brightness and contrast are manipulated a
little.

Bob W. (Catching up after a driving 3500 miles in 58 hours over a 10
day "vacation")

On Wed, 27 Jun 2007 20:18:49 -0400
"Ed Anderson" <eanderson@carolina.rr.com> wrote:

> Ah, for old eye balls, this photo does indeed make the transformation much more meaningful.  I just couldn't see the difference - perhaps not looking closely enough.  But, this photo does show the change much better.  
> 
> From what I can see (loaded statement), it does not appear that the process affected the bearing material - is that your assessment?
> 
> Now is the process would only work for taking carbon off {:>)
> 
> Thanks Monty, very impressive.  
> 
> Ed
> 
>   ----- Original Message ----- 
>   From: M Roberts 
>   To: Rotary motors in aircraft 
>   Sent: Wednesday, June 27, 2007 8:05 PM
>   Subject: [FlyRotary] Amazing Transformation
> 
> 
>   OK Ed,
> 
>   Sheesh...some people are so demanding. :-)
> 
>   Here is a pic with better lighting.
> 
>   Monty
> 
> 
> ------------------------------------------------------------------------------
> 
> 
>   --
>   Homepage:  http://www.flyrotary.com/
>   Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
> 


-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://www.roblinphoto.com/shop/