Mailing List flyrotary@lancaironline.net Message #38038
From: Tracy crook <lors01@msn.com>
Subject: RE: [FlyRotary] Re: Buly EC2 Repair (beginning to understand the problem)
Date: Sat, 23 Jun 2007 12:31:31 -0400
To: <flyrotary@lancaironline.net>
Cc: <Laura@rotaryaviation.com>, <Tracy@Rotaryaviation.com>
Good call Buly : )
Sorry for the 'pointed' reply, I'm under pressure and always concerned about every piece of hardware I ship out.  Part of it is paternal feelings (freaky huh?) and part is the fear of the almost inevitable call from the lawyer of some widow whose husband has crashed with an RWS product on board.

Shipping your (and Rusty's) units  back Monday.

Tracy


From: Bulent Aliev <atlasyts@bellsouth.net>
Reply-To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: [FlyRotary] Re: Buly EC2 Repair  (beginning to understand the problem)
Date: Fri, 22 Jun 2007 17:51:39 -0400

Thanks Tracy. I sent it because had a feeling that there could be a  problem also. It was modified since the canopy was pushing down on  the connector.
Buly


On Jun 22, 2007, at 10:38 AM, Tracy crook wrote:


Buly,
I was preparing to ship your EC2 & EM2 back after repairs when I  noticed the EC2 control panel in the bottom of the box you sent.    I normally don't need this when repairing EC2s but yours turned out  to be an exception.  I noticed what I thought to be more shipping  damage.  The connector was bent down at a considerable angle.  On  closer observation it was apparent that this was an intentional  modification as the solder connections had been reheated and the  connector solder pins bent down while pulling them  out of the  board.  The solder connections had been re-soldered.   During this  process a couple of the connections were broken.  This caused  several of the programming modes to be disabled and even worse, the  Mode selected on the thumbwheel switch was not always what was  actually being programmed.   To say the least, this is a formula  for disaster.

Don't do this to my babies!  If it won't fit in the location you  are trying to fit it in, find another location or modify the  location, NOT THE EC2!

I'll try to get this fixed before leaving next Tuesday but it'll be  close.  No promises though.

Tracy



--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/ flyrotary/List.html


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html


Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster