Received-SPF: none
 receiver=logan.com; client-ip=211.29.133.164; envelope-from=lendich@optusnet.com.au
Message-ID: <008401c75e25$bfb8d1f0$02d3683a@george>
From: "George Lendich" <lendich@optusnet.com.au>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-1880364@logan.com>
Subject: Re: [FlyRotary] Re: First Taxi, Congrats
Date: Sun, 4 Mar 2007 16:24:20 +1000
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=original
Content-Transfer-Encoding: 7bit

Mark,
I have come to the same conclusion, as all other coils seem to be under 
stress dues to the doubled workload, whereas the Remesis coils are made for 
the demand.
George ( down under)

Bill,
I'm using the LS1 truck coils.  They're mounted low in the cowl, on the cool 
side of the engine, below the plugs.  If I had it to do over, I would try to 
find a set of Renesis coils as they are lighter and very robust.

Mark

________________________________

From: Rotary motors in aircraft on behalf of Bill Schertz
Sent: Sat 3/3/2007 7:13 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] First Taxi, Congrats


Congratulations Mark, first Taxi is a major milestone.

On a separate note, are you using Mazda coils or LS-1 coils?
Bill Schertz
KIS Cruiser # 4045
________________________________

 Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/


--------------------------------------------------------------------------------


> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/
>