Received-SPF: none
 receiver=logan.com; client-ip=204.127.200.81; envelope-from=rlwhite@comcast.net
Date: Thu, 24 Aug 2006 21:12:33 -0600
From: Bob White <rlwhite@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Sensors
Message-Id: <20060824211233.dffc58f4.rlwhite@comcast.net>
In-Reply-To: <list-1347678@logan.com>
References: <list-1347678@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Not quite finished, but trying DANG hard.  I have an A&P working on my
condition inspection (I didn't build it) and need to call the DAR.
Maybe soon.  You all will be the second to know. :)

Bob W.

On Thu, 24 Aug 2006 22:38:56 -0400
Bulent Aliev <atlasyts@bellsouth.net> wrote:

> that's because we are all finished with our planes? :)
> Bulent "Buly" Aliev
> FXE Ft lauderdale, FL
> http://tinyurl.com/s5xw8
> 
> On Aug 24, 2006, at 10:36 PM, Thomas Phy wrote:
> 
> > How long were your emails being collected? Allot of us seem to be  
> > either not getting emails, or it's just quiet. It's never been this  
> > quiet.
> > TP
> > ----- Original Message -----
> > From: John Downing
> > To: Rotary motors in aircraft
> > Sent: Thursday, August 24, 2006 7:05 PM
> > Subject: [FlyRotary] Sensors
> >
> > Thankyou for the input on the oil temperature sensors.  Some how my  
> > e-mail got screwed up and my son talked with a techy tonight for an  
> > hour and found my flyrotary mail in a Yahoo account which I didn't  
> > know I had, so I had 265 messages from you folks and none in my  
> > regular Outlook Express account.  I was glad to see that you folks  
> > hadn't dropped off the face of the earth because this is the only  
> > source of information I have for the rotary.  Keep up the good  
> > work.  JohnD   Hope to go for engine start in about 3 weeks.
> >
> 
> 
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/


-- 
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (first engine start 1/7/06)
Custom Cables for your rotary installation -
http://www.roblinphoto.com/shop/