Received-SPF: none
 receiver=logan.com; client-ip=216.148.227.89; envelope-from=techwelding@comcast.net
Message-ID: <000c01c6222e$8e8e7aa0$9ef93f44@dell>
From: "Ed Klepeis" <techwelding@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-954087@logan.com>
Subject: Re: [FlyRotary] Mazda alternator pulley
Date: Wed, 25 Jan 2006 22:11:17 -0600
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=response
Content-Transfer-Encoding: 7bit

Dear Dennis
      Try unorthodox racing 631 586 9525 they make alum pulleys.If you have 
any questions contact off line and I can tell you more.
                                                                             
                    Regards
 www.techwelding.com 
Ed Klepeis
----- Original Message ----- 
From: "Dennis Haverlah" <clouduster@austin.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Wednesday, January 25, 2006 9:24 PM
Subject: [FlyRotary] Mazda alternator pulley


> I'm planning on using the 100 amp RX -8 alternator in my Reneses powered 
> RV - 7A.  I'd like to slow the alternator speed down to below 10 k rpm. 
> Does anyone know of any pulleys in the 3 in diameter range that would fit 
> this alternator?   It uses a superentine belt not the "V" belt.   Also I'm 
> planning on using the Aeroquip FC 332 socketless hose for my oil lines to 
> a  RX - 7  oil cooler.  Has anyone found a source for the barbed hose 
> fittings with the 18 mm X 1.5 metric threads?  All I have found are 1/4, 
> 3/8 and 1/2 pipe threads with barbs.
>
> Thanks,
>
> Dennis H.
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/