X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from mtiwmhc13.worldnet.att.net ([204.127.131.117] verified) by logan.com (CommuniGate Pro SMTP 5.0.5) with ESMTP id 905985 for flyrotary@lancaironline.net; Fri, 30 Dec 2005 02:09:29 -0500 Received-SPF: none receiver=logan.com; client-ip=204.127.131.117; envelope-from=keltro@att.net Received: from 204.127.135.64 ([204.127.135.64]) by worldnet.att.net (mtiwmhc13) with SMTP id <20051230070833113005ber9e>; Fri, 30 Dec 2005 07:08:43 +0000 Received: from [64.136.27.229] by 204.127.135.64; Fri, 30 Dec 2005 07:08:32 +0000 From: keltro@att.net (Kelly Troyer) To: "Rotary motors in aircraft" Subject: Re: [FlyRotary] Re: EC-2 Cable Question Date: Fri, 30 Dec 2005 07:08:32 +0000 Message-Id: <123020050708.11059.43B4DCF00006361F00002B332160280741019D9B040A05@att.net> X-Mailer: AT&T Message Center Version 1 (Nov 10 2005) X-Authenticated-Sender: a2VsdHJvQGF0dC5uZXQ= MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="NextPart_Webmail_9m3u9jl4l_11059_1135926512_0" --NextPart_Webmail_9m3u9jl4l_11059_1135926512_0 Content-Type: text/plain Content-Transfer-Encoding: 8bit Thanks Bob.......Going to need some of your products before long !! -- Kelly Troyer Dyke Delta/13B/RD1C/EC2 -------------- Original message from Bob White : -------------- > Hi Kelly, > > To minimize the amount of stuff I need to keep on hand, I supply all > EC2 cables with the three wire shielded cable. For the Renesis sensor, > one wire is not used. The shield is grounded at the EC2 per Tracy's > instructions. > > Bob W. > > On Thu, 29 Dec 2005 16:36:54 +0000 > keltro@att.net (Kelly Troyer) wrote: > > > To Bob White, > > Bob is the lead for the ignition sensor shielded ? Since the Renesis > sensor > > only requires two conductors instead of three for the RX-7 sensor can you > > provide the two conductor lead for a Renesis EC-2 cable ? Also is the shield > > for this lead routed to ground at the EC-2 as is common practice ? > > -- > > Kelly Troyer > > Dyke Delta/13B/RD1C/EC2 > > > -- > http://www.bob-white.com > N93BD - Rotary Powered BD-4 (Projected engine start - maybe next week) > Custom Cables for your rotary installation - > http://www.roblinphoto.com/shop/ > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/ --NextPart_Webmail_9m3u9jl4l_11059_1135926512_0 Content-Type: text/html Content-Transfer-Encoding: 8bit

Thanks Bob.......Going to need some of your products before long !!

--
Kelly Troyer
Dyke Delta/13B/RD1C/EC2

-------------- Original message from Bob White <rlwhite@comcast.net>: --------------

> Hi Kelly,
>
> To minimize the amount of stuff I need to keep on hand, I supply all
> EC2 cables with the three wire shielded cable. For the Renesis sensor,
> one wire is not used. The shield is grounded at the EC2 per Tracy's
> instructions.
>
> Bob W.
>
> On Thu, 29 Dec 2005 16:36:54 +0000
> keltro@att.net (Kelly Troyer) wrote:
>
> > To Bob White,
> > Bob is the lead for the ignition sensor shielded ? Since the Renesis
> sensor
> > only requires two conductors instead of three for the RX-7 sensor can you
> > provide the two conductor lead for a Renesis EC-2 cable ? Also is the shield
> > for this lead routed to ground at the EC-2 as is common practice ?
> > --
> > Kelly Troyer
> > Dyke Delta/13B/RD1C/EC2
>
>
> --
> http://www.bob-white.com
> N93BD - Rotary Powered BD-4 (Projected engine start - maybe next week)
> Custom Cables for your rotary installation -
> http://www.roblinphoto.com/shop/
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/

--NextPart_Webmail_9m3u9jl4l_11059_1135926512_0--