Mailing List flyrotary@lancaironline.net Message #28836
From: <kenpowell@comcast.net>
Subject: Re: [FlyRotary] Hose assembly
Date: Thu, 29 Dec 2005 16:36:46 +0000
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Tracy,
Give the metal fitting and the inside of the hose a squirt of walmart or Gumout carb cleaner.  This will act as a lubricant but will evaporate quickly.  Give it a squirt then quickly push and twist like mad!!!  (I want a picture of this!!!)

Ken Powell
Bryant, Arkansas
501-847-4721
C150 / RV-4 under construction
 
-------------- Original message --------------
From: "Tracy Crook" <lors01@msn.com>
Not a stupid question at all.  Nothing special about the sensor but note that it is a variable reluctance sensor, not Hall effect.  Most any VR type will work but some are more reliable than others.  The Subaru does not have a good track record based on the number of Soob flyers who have had failures and asked me to make dual pickup versions for the EJ-2x & EG-33 engines.  I have not heard of a Mazda sensor failing but that is of course no guarantee that it can't happen. 
 
Do be sure to check the polarity of any VR sensor used.  The output should swing positive as the tooth moves toward it and negative as it moves away.
 
Spent yesterday configuring my oil system on the RV-8.  I should have heeded Rusty's warning on those "Easy push-on oil line fittings"  The Summit description says "no more busted knuckles trying to assemble oil lines".  Ha!  I'm an FAA "standard 170 lb pilot" but that is not enough force to put on those blasted fittings.  Anyone know a trick to make them easier to put on? 
 
Tracy (finally getting my XM weather activated)
----- Original Message -----
Sent: Thursday, December 29, 2005 9:39 AM
Subject: [FlyRotary] Re: Eccentric Shaft Position Sensor

Kelly Troyer wrote:

>
>     > > Ken,
>     > > Hit the junkyards........1999-2002 Mazda Protege "Camshaft
>     Sensor"
>     > > is the same part number as the 1993-95 RX7 eccentric shaft
>     sensor....
>     > > Rock Auto price had best price of $81.00 that I
>     found.......Get the
>     > > connector from the donor car harness with the sensor !!
>     > > --
>     > > Kelly Troyer
>     > > Dyke Delta/13B/RD1C/EC2
>     > >
>     >
>     > Guy on eBay is letting them go for $40.
>
Tracy, I don't really expect you to know such trivia, but it can't hurt
to ask.  The eBay  store with the RX-8 crankshaft sensor has a bunch of
other models, so for as little as $5.  Is there anything special about
this particular model, or is it just a hall effect sensor?  Some of the
other model numbers looked like they had long mounting arms that would
make installation in an RX-7 series a tad easier.

--
         ,|"|"|,                                    |
----===<{{(oQo)}}>===----        Dyke Delta         |
        o|  d  |o          www.ernest.isa-geek.org  |

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster