Message

http://www.iequus.com/partinfo.asp?PartNumber=3D8068=20 =20 I bought one of these, and got a chance to test it briefly today. I = just had to see if it would work with the LS-1 coil trigger signal, and amazingly, it does! I didn't run the engine over about 2500 rpm, so = this wasn't a full test, but I'm pretty optimistic at this point. I just set = the tach to "2 cylinder", and it reads correctly. Sure hope it does the = same at high rpm.=20 =20 Rusty =20 =20 =20 ------=_NextPart_000_0001_01C368F4.D0670FF0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Message

I just found a tach locally that "should" = work, if=20 you're willing to use the inductive pickup that comes with it. = You'll be=20 happy to know that it's 3 - =20 3/8" round as well. According to the online manual, it's fully=20 programmable for 1,2,3,4,5,6,8,10,and 12 cylinders, so I think we're=20 covered. If I have any more trouble with my Tiny Tach, I'll be = heading=20 down to the store to pick one of these up. =20

Here's the URL- http://www.iequus.com/partinfo.asp?PartNumber=3D8068

I bought one of=20 these, and got a chance to test it briefly today. I just had = to see=20 if it would work with the LS-1 coil trigger signal, and amazingly,=20 it does! I didn't run the engine over about 2500 = rpm, so=20 this wasn't a full test, but I'm pretty optimistic at this point. = I just=20 set the tach to "2 cylinder", and it reads correctly. Sure = hope=20 it does the same at high = rpm.

Rusty

------=_NextPart_000_0001_01C368F4.D0670FF0--