X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from smtp104.sbc.mail.mud.yahoo.com ([68.142.198.203] verified) by logan.com (CommuniGate Pro SMTP 4.3.5) with SMTP id 1022400 for flyrotary@lancaironline.net; Sun, 26 Jun 2005 17:47:56 -0400 Received-SPF: none receiver=logan.com; client-ip=68.142.198.203; envelope-from=dcarter@datarecall.net Received: (qmail 97098 invoked from network); 26 Jun 2005 21:47:11 -0000 Received: from unknown (HELO Davidscmptr) (dcarter11@sbcglobal.net@65.70.248.228 with login) by smtp104.sbc.mail.mud.yahoo.com with SMTP; 26 Jun 2005 21:47:10 -0000 Message-ID: <056101c57a98$95331de0$6401a8c0@ip.net> Reply-To: "David Carter" From: "David Carter" To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Re: cooling system air cushion (was: Coolant Leak) Date: Sun, 26 Jun 2005 16:46:59 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1409 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1409 Hmmm. We've previously discussed destruction/damage of radiators - - - by electroysis. Now we are discussing something - system full (no air) or system not quite full (air cushion), in which pressure rises rapidly to or above "cap release pressure" with No Air, or remains low with Air Cushion. - Maybe I've been blowing my radiators by filling VERY CAREFULLY to the very top of my top mounted radiator cap neck on my 2 Ford Escorts!!! David ----- Original Message ----- From: "Dale Rogers" To: "Rotary motors in aircraft" Sent: Sunday, June 26, 2005 4:21 PM Subject: [FlyRotary] Re: cooling system air cushion (was: Coolant Leak) > Hi All, > > I know John was cracking a funny, but - in all seriousness > - don't we already _have_ a solution to this? > > Maybe I'm overlooking something (and if I am, I'm *certain* > that someone will happily correct me), but isn't the air > cushion part of the job of the swirl pot / expansion tank? > It traps any air in the system and holds it above the level > of the engine block. Then, when the pressure exceeds the > cap rating it vents the air (and eventually, maybe some > coolant). In most systems I've seen, the venting goes into > overflow bottle, such that - when the engine cools - first > it sucks back in the water pushed overboard; then it replentishes > the air cushion. > > So, with a properly located swirl pot, one fills to about > 1 - 2" below the cap, just as with an older (1950's) automobile radiator. Right? > > Regards, > Dale R. (___ > COZY MkIV-R13B #1254 |----==(___)==----| > Ch's 4, 5, 9, 16 & 23 in progress o/ | \o