X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from fed1rmmtao01.cox.net ([68.230.241.38] verified) by logan.com (CommuniGate Pro SMTP 4.3.5) with ESMTP id 1022385 for flyrotary@lancaironline.net; Sun, 26 Jun 2005 17:21:56 -0400 Received-SPF: none receiver=logan.com; client-ip=68.230.241.38; envelope-from=dale.r@cox.net Received: from smtp.west.cox.net ([172.18.180.52]) by fed1rmmtao01.cox.net (InterMail vM.6.01.04.00 201-2131-118-20041027) with SMTP id <20050626212111.TLDV18672.fed1rmmtao01.cox.net@smtp.west.cox.net> for ; Sun, 26 Jun 2005 17:21:11 -0400 X-Mailer: Openwave WebEngine, version 2.8.15 (webedge20-101-1103-20040528) From: Dale Rogers To: "Rotary motors in aircraft" Subject: [FlyRotary] Re: cooling system air cushion (was: Coolant Leak) Date: Sun, 26 Jun 2005 17:21:11 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Message-Id: <20050626212111.TLDV18672.fed1rmmtao01.cox.net@smtp.west.cox.net> Hi All, I know John was cracking a funny, but - in all seriousness - don't we already _have_ a solution to this? Maybe I'm overlooking something (and if I am, I'm *certain* that someone will happily correct me), but isn't the air cushion part of the job of the swirl pot / expansion tank? It traps any air in the system and holds it above the level of the engine block. Then, when the pressure exceeds the cap rating it vents the air (and eventually, maybe some coolant). In most systems I've seen, the venting goes into overflow bottle, such that - when the engine cools - first it sucks back in the water pushed overboard; then it replentishes the air cushion. So, with a properly located swirl pot, one fills to about 1 - 2" below the cap, just as with an older (1950's) automobile radiator. Right? Regards, Dale R. (___ COZY MkIV-R13B #1254 |----==(___)==----| Ch's 4, 5, 9, 16 & 23 in progress o/ | \o > > From: "John Slade" > Date: 2005/06/26 Sun PM 12:43:00 EDT > To: "Rotary motors in aircraft" > Subject: [FlyRotary] Re: Coolant Leak > > That's excellent input, Al. I appreciate it. > > Now I have one remaining question..... > > How do I get the cup of air IN THERE? > > I measured out a cup precisely using my wife's kitchen measuring thingy and > poured it in, but it just spilled all over the engine. :) > Regards, > John > > > >> Homepage: http://www.flyrotary.com/ > >> Archive: http://lancaironline.net/lists/flyrotary/List.html >