----- Original Message -----
From: Ed Anderson <mailto:eanderson@carolina.rr.com>
To: Rotary motors in aircraft <mailto:flyrotary@lancaironline.net>
Sent: Wednesday, June 22, 2005 8:09 PM
Subject: Home Again!!

Hi Gang,
 
Well,  after scooping out a bird's nest from my engine inlet duct this AM (a sure sign of the aircraft being static too long {:>)), I successfully launched and made it home after almost one brake fire, one engine rebuild and 4 weeks of being gone.  Found 540 rotary e mails waiting - not going to attempt to wade through them {:>), so if anyone had a specific question for me - please re send.
 
Got more "honey dos" waiting than any man should have, but its great to be home.
 
Rotary rebuilds in Cajun country is not for the faint of heart {:>) - actually, the only problem is there are simply no rotary houses around and every part has to be shipped in.  Fortunately, my farmer brother-in-law had most of the tools and a garage to do the rebuild in.  I did rediscovery why I don't come back home often - the heat and particularly the humidity just about did me in.
 
 
Want to thank your all for your suggestions and particularly those of you who offered to travel considerable distances to render assistance.  This time it appears I got all the parts together correctly with no undue "tightness".  Coolant pressure remained below 10 psi for the entire trip - so appears the hot spots on the side housings did not warp them and the rings are holding.
 
I'll try to get up on the exciting events that have been occurring on the list while I was off of it.
 
Best Regards
 
Ed
 
 
Ed Anderson
Rv-6A N494BW Rotary Powered
Matthews, NC
eanderson@carolina.rr.com <mailto:eanderson@carolina.rr.com>